SERVICES
FINITE ELEMENT ANALYSIS (FEA)
Static and Quasi-Static Assessments of
Marine Structures
MCA uses a FEA approach that quantifies the effects of extreme design loads and predicts the relative likelihood of failure due to over-stress and buckling. Candidate modifications addressing areas of concern are also simulated to optimize and ensure their effectiveness.
SPECTRAL FATIGUE ANALYSIS
FEA-Based Fatigue Life Assessment of Ship Structure at Global and Local Levels
MCA uses a spectrum of over 500 load cases accounting for varying wave height, wave heading, draft, and non-linear waterline effects; then incorporates either measured or Class-defined weather data. Loads are derived based on hull-form simulation in hydrodynamic software. Full-ship modeling is used to capture global loads which are then applied to local detail models providing accurate fatigue life predictions for as-built structure and potential modifications.
CRACK PROPAGATION
ANALYSIS
Accurate Crack Growth Rate Predictions
The FEA-based approach used by MCA accounts for the load shedding that occurs during crack growth in redundant structure, providing predictions more accurate than purely theory-based assessments, and assisting with quantifying relative urgency of repair and identifying optimal inspection intervals.
NATURAL FREQUENCY ANALYSIS
Eigen Value Assessments of Structural Mode Shapes
Natural frequency analysis, including the effects of added-mass from entrained fluids, is used to diagnose and remedy structural damage resulting from vibration caused by propeller-induced pressure pulses, main engine, or other rotating machinery.
ENGINEERING DESIGN AND DRAFTING
Effective and Practical Solutions
MCA uses proven analytical methods and years of experience to identify and address marine structural concerns. Practical and effective design enhancements are clearly presented on engineering drawings appropriate for Class approval.
ON-SITE ENGINEERING SUPPORT
Real-Time Support Anywhere in the World
MCA has decades of analytical and field experience, allowing us to quickly identify potential areas of concern, make practical repair recommendations, and assist with large-scale modifications.